12 Best 3D Printer Under 300 in 2022 – Complete Buying Guide

It’s been 40 years since the launch of 3D printers, but it was just before a few decades that it came into action. Nowadays, the idea of buying or investing in a home 3D printer is influenced a lot that almost every home here is equipped with a good or bad 3D printer.

How many times have you faced a scam of buying a low-quality printer by paying bulks of your salary? This mishap usually happens when you have many names in the market, each claiming to give you their best. Right?

The growing demand for 3D printers has also impacted the price, which is now the same as buying gold. Right? Investing in any device without knowing much about it isn’t wise to do.

In short, if we say that you should go through a proper guide before buying a product or a device would help you to avoid scams. To reduce your research period, we’ve featured here a shortlist of the best 3D printer under 300 so that you can make an easier and quicker decision.

All the products you would see in our guide are explained alongside their features in detail to let you analyze them at their fuller. Now, you don’t need to break your bank to access a top-notch home 3D printer.

Don’t worry if you can’t manage your time reading or going through all the products; we’ve marked our top choice here. This quick decision will help you save time in reviewing all of them. Official Creality Ender 3D printer leads our priority list of the best 3D printer under 300.

Contents

Top 12 Best 3D printer Under 300 in 2022 – Comparison Table

Best 3D Printer Under 300FeaturesPrice
Official Creality Ender350-watt power supply Check Price
COMGROW Creality Ender 3 Pro High-end print quality Check Price
ANYCUBIC Mega-SCura software upgraded Check Price
ANYCUBIC Photon MonoMono LCD screen printing Check Price
Creality Ender-3 V232-bit motherboard Check Price
Official Ender 3 V2180 mm/s printing speed Check Price
Monoprice MP10Solidly built device Check Price
QIDI Technology X-one2Compatible with Windows and Mac OSX Check Price
JGMAKER MagicFilament runout detection Check Price
Monoprice Maker Select PlusWider build envelops Check Price
Monoprice 15365 Select Mini Fantastic print quality Check Price
Creality Ender 3 ProImproved temperature fluctuation Check Price

1. Official Creality Ender 3D Printer – best beginner 3D printer under 300

Official Creality Ender 3 V2 Upgraded 3D Printer

Easy to assemble

Creality makes this DIY 3D Printer, yet the construction is simple enough for people of all skill levels to do in one afternoon. Because this kit does not involve any complex techniques like soldering or pressing, it is out of reach for those who only have basic equipment and knowledge. I put Ender 3 Pro together in a little over an hour, including unboxing and putting on the power switch. No additional tools were required.

Build Quality

The V4.2.2 control board that comes with the Creality Ender 3 Pro printer is the industry standard. The wiring is well-done, with multiple cable plugs securely secured to their sockets using silicone potting compound to prevent them from falling loose during shipping or use. The cables are neatly packaged and handled, allowing free airflow over the stepper drives.

Build Quality

Amazing for Beginners

Creativity Ender 3 is an excellent choice for those just getting started in the creative world or those on a tight budget. Even though this 3D printer has several drawbacks, it is still an excellent value for the money. The Creality Ender 3 is ready for high-quality 3D printing right out of the box, unlike other low-cost solutions like the Anet A8. There have also been numerous modifications due to the expanding 3D printer community. This 3D printer is ideal for a beginner which means it can be easily utilized.

Pros
  • Ideal for a newbie.
  • Easy to assemble.
  • 350W power supply.
  • Easily heats up.
Cons
  • A bit noisy.

Final Verdict

If you love to work in a quiet environment, this device isn’t for you. Ignoring the fact that it’s a bit noisy, many features attract its users themselves and bounds them to buy.

2. COMGROW Creality Ender 3 Pro 3D Printer

COMGROW Creality Ender 3 Pro 3D Printer

Upgraded mechanical Properties

In Ender 3 Pro, the base of the Y-axis is now made of a tougher 40 x 40 aluminum profile. Creality’s goal was to make the printing surface more stable overall, and it was a success. Rims with improved bearings increase rigidity and reduce friction, all of which contribute to better dimensional stability. A combination of wide rubber feet also helps to reduce noise.

Improved magnetic printing surface

Magnetic pressure bed “C-MAG” has been added to Ender 3 Pro. The sheet is detachable and flexible, making it simple to pick up the printouts from the building board. The rough surface aids in the adhesion of the bed’s initial layers. Because of these enhancements, the Ender 3 Pro’s pricing has gone up marginally.

Design

The Creality Ender 3 Pro is a great first desktop 3D printer. It’s not a high-end 3D printer with a slew of options and settings, but it gets the job done and produces high-quality prints. If you’re just getting started in manufacturing, this printer is a great choice. Molten deposition modeling is used in this small machine. It has a large print area so that you can make larger components with it.

Creality Ender 3 Pro Design

Pros
  • Affordable.
  • Compactly designed.
  • High-end print quality.
  • Compatible with flexible filaments.
Cons
  • Tricky print bed leveling.

Final Verdict

This 3D printer is fairly priced as the features it offers are worth the money. If you are a newbie to printing, this 3D printer under 300 can be an exceptional choice of yours.

3. ANYCUBIC Mega-S 3D Printer

ANYCUBIC Mega-S New Upgrade 3D Printer

Design

The Anycubic Mega S is not a work of art but a functional instrument that also looks attractive. The matte black metal frame of the Mega S ensures maximum stability during the printing process. As a result, it has a lot in common with other 3D printer kits. The Mega S’s pressure chamber is exposed and unprotected by windows.

ANYCUBIC Mega S Design

The printer has a small 3.5-inch color touch screen on the bottom for convenient use right on the device. The touchscreen is responsive. The menus, on the other hand, are available in either Chinese or English. The pause, stop, and reverse buttons are located directly below the display. The Anycubics Mega S is generally quiet and smooth to the touch.

Easy to Assemble

Anycubic’s Mega S comes in a kit form. The components are ready, but the final assembly is still a work in progress. A power supply unit is incorporated in addition to the printer’s primary unit. As a bonus, the 3D printer ships with two extra attachments, one for lifting out the printed things from the build plate and the other for holding the glow rolls. Moreover, it comes with an SD card to start your printing right away.

Pros
  • Supports a wide variety of filaments.
  • Solid quality prints.
  • Cura software upgraded.
  • Fairly priced.
Cons
  • Disappointed spool holder.

Final Verdict

This open-frame 3D printer can be a superb choice of yours that offers decent printing quality. The device is priced fairly for those who want to experience 3D printing for the first time.

4. ANYCUBIC Photon Mono 3D Printer – best resin 3D printer under 300

ANYCUBIC Photon Mono 3D Printer

Printing speed

ANYCUBIC Photon Mono X Printing Speed

The Anycubic Photon Mono has an outstanding turn for a resin printer, curing at a maximum of almost 1.5 seconds per shift. In addition, its 2560 x 1620-pixel resolution (equivalent to an XY resolution of 51 microns) could result in some nice printouts. The technology isn’t revolutionary, but it’s pleasingly remarkable and capable of producing stunning prints that preserve minute details.

Additional specs

With Photon Workshop, you may include text to your printer and employ 8-way anti-aliasing. Because previous Anycubic Photon printers were fully compatible with the ChiTuBox software, we expect that this one will be as well. In the meantime, you can use Mango’s lychee slicers, which come pre-configured to work with Photon Mono.

Easy setup

Photon Mono’s setup is quick, easy, and user-friendly, even for total newbies. The provided power source plugs into the rear of the unit, the building platform, and the cylinder took over an hour to calibrate and fill, and the translucent yellow UV-resistant lid rests on top of the base. The handbook that came with it is clear and easy to understand, and customers have had no difficulty following the instructions to set up the system.

Pros
  • Top-notch prints.
  • Least cost.
  • Mono LCD screen printing.
  • Upgraded Photon Workshop slicer app.
Cons
  • Disappointed key features.

Final Verdict

It’s been five long years since its release, and it has maintained its name till yet due to its amazingly designed body and high-end features.

5. Creality Ender-3 V2 Latest DIY 3D Printer

Creality Ender-3 V2 Latest DIY 3D Printer

Design

The filigree design of the Creality Ender-3 V2 3D Printer is identical to that of the DIY Creality Ender-3 3D printer. A sturdy metal enclosure, carried over from the Creality Ender-3 3D Printer, completes the package. Because of the machine’s integrated structure and modular design, the power supply is out of sight and mind.

Detects Filament Runout

Most 3D printers today have this feature. Instead of standing in the middle of a long press and forgetting how much filament is left on the coil, this function is detected when the filament is consumed. If your printer does not have this feature, you have the oldest printer. So, when you buy printers, be sure to include the feature mentioned above.

Additional features

To deliver a silent printing experience, the Creality Ender-3 V2 boasts a new 32-bit motherboard with extra-quiet stepper motors. This condition allows you to print at night without disturbing your sleep. A toolbox is also included in the printer’s enclosure, allowing you to reach the tools you most frequently use when printing rapidly. With the Ender-3 V2 3D Printer, you have the option to add a laser engraving head, a smoothing probe, a complete enclosure, and much more.

Creality Ender-3 V2 3D Printer

Pros
  • Fantastic print quality.
  • Easy usage.
  • Budget printer.
  • 32-bit motherboard.
Cons
  • Disappointed filament loading.

Final Verdict

It will be 100 percent right if we say that this 3D budget printer is worth the hype as the features offered are quite enough for the price tag set for it.

6. Official Ender 3 V2 3D printer

Offical Ender 3 V2 3D Printer Upgraded

Aluminum Extrusion

This feature improves the printer’s general reliability and functionality, making it a better choice for you. Better quality prints will result from a more durable printer, as vibrations that cause “loosening” will make your prints errors. This feature can be found in Ender 3 Pro, too.

Color screen interface

A vibrant, user-friendly UI completes the Ender 3 V2’s aesthetics. Ender 3’s revamped user interface is more attractive and easier to use than the original. As a result, pressing the button on the Ender 3 can result in selecting the incorrect option or even making the incorrect press! Ender 3 V2’s user interface has been redesigned to be more fluid and tidier.

XY Axis Injection Tensioner

You can quickly and simply adjust the tension on your belt with the axial injection tensioner. Using an Allen key to apply stress on the belt and then tightening the screws while maintaining the tension was Ender 3’s method of belt-tightening. It functioned, but it wasn’t particularly useful, so this is a welcome adjustment.

Pros
  • Amazing build volume.
  • 180 mm/s printing speed.
  • Easy to use.
  • Rapid heating hotbed.
Cons
  • A bit noisy.

Final Verdict

With the Carborundum glass platform and a compactly designed body, this 3D printer can be a fantastic experience for you. Grab the opportunity without laughing all the way to the bank.

7. Monoprice MP10 3D Printer

Monoprice 121711 Select Mini 3D Printer V2

Design

The MP10 3D printer has a 300×300 hot, flexible, and removable steel spring plate and a metal extruder. The magnetic extruder features a built-in level sensor that makes it simple to adjust the Z offset in the settings for even the first layers. The cable guide sleeve hides all the connections, so they aren’t an issue. You can continue printing after a power outage, a sudden power outage, or an unintentional disconnection with the Resume Printing feature. Prints look great because of how well-defined and crisp they are.

Three incredibly powerful magnets hold the print head firmly in place. It may help in a variety of ways. For example, changing the nozzle is a cinch, but it also means that if you configure your board settings incorrectly and then run into the model, nothing will go wrong. Instead, of bending or breaking something, the printhead simply detaches from the printhead housing and is removed.

Performance

It’s simple to switch to a different extrusion method thanks to the removable magnetic slide. It’s never been easier to perform maintenance on your computer. It’s also simple to get to your hot end, making changing the tool head a breeze. Replace a 0.4 mm nozzle with a 0.6 mm nozzle by simply changing the nozzle size. Easily, quickly, and conveniently.

Pros
  • Advanced features.
  • Solidly built device.
  • Value product.
  • Large-scale printer.
Cons
  • Need a lot of tunning.

Final Verdict

We would recommend the product due to its smooth performance, and it can easily be operatable and possess advanced features. Grab the opportunity before investing in the wrong product wasting your money.

8. QIDI Technology X-one2 3D Printer

QIDI Technology X-one2 Single Extruder 3D Printer

Design

The 3.5-inch touch screen on the X-One2 is incredibly snappy and easy to operate, and its icons are immediately recognizable. The user interface displays several parameters, such as the print progress and the printing bed temperature.

To get you started, here are some sample prints on the SD card that’s included. Additionally, the unique Qidi Print cutting program offers a wide range of useful functions while being simple to use. It’s also open-source, so you can use whatever disc application you want with Qidi Tech X-One2.

Heated Bed

The heated aluminum alloy pressure bed on the Qidi Tech X-One2 features a PEI-coated surface. The X-heated One2’s bed makes it possible to print temperature-sensitive materials like ABS or PETG. The X-One 2 3D printer from Qidi Tech includes an open media system so that users can experiment with a wide range of brands and materials.

Fused Deposition Molding Technology

The printer uses Fused Deposition Molding technology for the printing process, which involves extruding molten thermoplastic material through a die that then moves across a heated building platform. The 0.4 mm extrusion die on the X-One 2 can be heated to a maximum of 250 degrees Celsius. The extrusion unit has a direct drive system, which differs from the Bowden unit in that the extruder motor is in a different place.

Pros
  • Compatible with Windows and Mac OSX.
  • Lightweight.
  • It comes with an SD card.
  • Amazing build volume.
Cons
  • A bit disappointing print quality.

Final Verdict

This affordable desktop 3D printer offers you great value for money as this is very sturdy and well built. But we would like to suggest that if you are a newbie, don’t go for this product as this can be a mess for beginners.

9. JGMAKER Magic 3D Printer

JGMAKER Magic 3D Printer

Sturdy body

The metal frame of the 3D printer was designed to provide maximum print stability for the user. Vibrations do not impact the accuracy of the parts while using this system because it is highly reliable. Printed authentic products will be easy with this design’s reliability.

Easy to Assemble

If you want a plug-and-play printer, you’ll have to search elsewhere. However, it is not a kit that needs more than a single day to assemble. Even if you’ve never connected modules before, JG Maker Magic takes roughly two hours to complete.

Removable build plate

They are removing the building board after printing will allow you to see the unprinted sections below. The easy-to-remove stages on the flexible plate make it simple for the user to remove the printouts when they are ready.

Pros
  • Sturdy and compact design.
  • Highly stable prints.
  • Built-in power supply.
  • Filament runout detection.
Cons
  • It doesn’t come with auto bed leveling.

Final Verdict

You can have this device at extremely affordable rates, but just to mention, it would be a bit difficult for a beginner to upgrade this printer as they are a bit challenging.

10. Monoprice Maker Select Plus 3D Printer

Monoprice Maker Select Plus 3D Printer

Long-lasting device

This printer has a long lifespan if properly cared for. Because of the metal construction, sturdy parts, complete software compatibility, and regular firmware updates of Monoprice, this printer should continue to be free of issues for many years.

Design

The Maker Select Plus has a metal body and a design inspired by the Prusa i3 but with an all-in-one form factor that attaches a 3.25-inch touch screen right to the front of the machine traps. The touch screen on this printer was a welcome change from other printers’ complicated control panels.

Monoprice Maker Select Plus

Interface and software

We had no idea we needed the printer’s touch screen until we got it. Monoprice could have done the finest thing to depart from the button-like control scheme because it removes monotony in the menu navigation. Monoprice employs a software-cutting strategy that few other companies have tried. Instead of making you install your disc software, Monoprice offers Cura cutter configuration profiles for its printers as an alternative to requiring you to do so.

Pros
  • Value for money.
  • Wider build envelops.
  • Broad material affinity.
  • Fantastic quality and reliability.
Cons
  • No automatic leveling.

Final Verdict

We would suggest you this product due to its amazing build volume and reliable nature. Now you don’t need to break your bank when you have such an inexpensive device with the quality feature.

11. Monoprice – 15365 Select Mini 3D Printer

Monoprice - 15365 Select Mini 3D Printer v2

Software

The high level of interoperability of Repetier, Cura, Replicator-G, and Simplify3D from Monoprice makes it a highly recommended printing software. Each one is regarded highly, and computer specialists will have no issue sifting through them after some experience.

This device is highly recommended since it can prepare parts for you and provide you with complete manual control. For Select Mini, using third-party software opens a whole new world of complex installation and CAD model preparation nearly equivalent to what is already being done in the industry. It has a huge advantage.

Printing Quality

Select Mini has a noticeable rumble. We believe that you should keep it in a room that is easily accessible from the outside. Transferring files to your computer/laptop through an SD card slot is highly recommended so that you may keep them separate while the construction is underway. It is a piece of cake, thanks to the huge color LCD.

Pros
  • Fantastic print quality.
  • Easy to set up and use.
  • Value for money.
Cons
  • A bit noisy.

Final Verdict

This product is a superb option for budget-conscious customers as you will not regret investing in them. Also, due to its easier handling, it is said that this one is a must-go for those who are new to 3D printing.

12. Creality Ender 3 Pro 3D Printer

Creality Ender 3 Pro 3D Printer

Design

The compact and sturdy design is an advantage as it can be set in any workbenches, letting you not stress for the space. Clogging and uneven extrusion are considerably reduced because of the innovative MK-8 extruder genie design. Due to their high rigidity, minimal friction, and good dimensional stability, high-precision ball bearings constructed of Delrin/POM technical thermoplastic are remarkably quiet. Due to the design of this 3D printer, more n more users are attracted to it.

C-MAG Magnetic Bed

The Creality Ender-3 Pro 3D printer is compatible with the ultra-modern “C-MAG” magnetic bed, which is entirely detachable and flexible. There is better adhesion with the rough surface than standard methods like tape, glue, or hair spray. With larger printing, model distortion is eliminated. To test whether your model jumps off the printed surface, remove the magnetic top and bottom pieces after complete printing.

CNC Machining Techniques

All-metal brackets and fasteners benefit from high-precision CNC machining, ensuring precise positioning and a more stable construction overall. New, ergonomically designed, larger leveling nuts make it easier and more accurate to level the bed, so you spend more time printing and less time leveling.

Pros
  • Improved temperature fluctuation.
  • Easier and quicker to assemble.
  • OSHS certified.
  • Noiseless functioning.
Cons
  • Not for office use.

Final Verdict

This device can be a superb home 3D printer that is equipped with wider Y-axis mounts. If you are in search of an office one, then you would be disappointed here.

Best 3D Printer under 300: Buying Guide

This French invention has influenced a lot in this modern era due to its amazing functioning and specifications. But due to a wide variety of options available in the market, we all are always a bit confused buying any product. So, before you move ahead in investing in a decent product, you should go through a guide defining all the important features to consider.

This guide of ours will let you know what to consider when buying a good, featured device. It is a really necessary step to take as to save from any scam that usually happens nowadays. Afterward, some of the frequently asked questions are marked below to remove all the confusion in your mind regarding these printers. Read all the features mentioned carefully and look for them before initiating the procedure.

Build Volume

The 3D print build volume (also known as the maximum print size) is critical. In contrast to some items that must be printed with specific dimensions, the size is not necessary if the purpose is only to discover and play with 3D printing.

Safety features

No matter how careful you are when working with hot electrical equipment, accidents will always happen. Investigate 3D printing security aspects. When printing is complete, the nozzles are immediately cooled. It’s best to seek a printer that has an automatic shut-off mechanism for the heated bed. When printing is paused or completed, automatically retract the nozzle to prevent harm from the excess filament.

Heated bed

Once you’ve slept in a heated bed, there’s no going back. Your print’s first layers are critical because they create the groundwork for the eventual product. The use of a heated bed aids in the maintenance of a solid, well-formed foundation. The optimal temperature varies from the filament to filament, but you can do experiments to determine where it should be.

If you want to go cheaper, you can check out this guide of the best 3D printers under 200.

Frequently Asked Questions:

Which 3D printer would you buy for under 300 with good reviews?

Without any doubt, Creality printers are leading the list of best 3D printers under 300 due to their top-notch specifications. Reviewing the devices before buying is one of the necessary steps to take. Besides this, all the products mentioned in our list are worth considering and buying.

What is the best 3D printer under $300?

Monoprice Mini Delta and Monoprice select Mini are considered the best under 250 dollars. A huge list of features is offered along with this device that helps you work more efficiently even if you are a beginner. Although the printing volume is small, you can even take it as an example to fit in any workbench.

Conclusion

We hope you succeeded in making up your mind regarding selecting your desired product from our list of the best 3D printer under 300. However, it can be much more challenging nowadays or in upcoming times when we have loads of options and reviews circulating on Amazon. Choosing the right option would be easier when you are on a site like this, compiling the best. Share this guide with your fellows and friends looking for budget-friendly options for a good 3D printer.

About David Shelton

Besides many test devices, David now has his eighth own 3D printer running and loves to print as a hobby for family, friends, and himself. He has over a decade of experience in 3D printing. He is happy to share his experience with each new article to help all of you regarding your printing queries! In his spare time, he loves to travel and watch obscure cinema. Happy printing!!

Leave a Comment