How Do I Fix The Flashing Light On My HP Printer?

There is no doubt that with the amazing qualities that HP printers come with, the user interface and user experience have been made much better. Now, if there is an issue with your printer or device, you can simply log onto the HP customer support website or any online resource, and the issue can be fixed without prior technical expertise.

For many of us though, some issues need a little bit of guidance especially if we haven’t come across them before! One such issue is when your HP printer has some lights flashing and you don’t know what they mean! It is important to understand that any lights on your printer have been added to alert you of the status. So, whether they are on, off, or flashing, it means a specific issue or problem has arisen.

In today’s article, we will be addressing these flashing lights as we learn how do I fix the flashing lights on my HP printer. What is important here is that each light means a very specific issue or problem needs to be addressed. So, that’s why each must be addressed individually.

How do I fix the flashing light on my HP printer?

1. If the power light is flashing

The first scenario where you can have flashing lights in your HP printer is when your power light is flashing. If this is the case, then your printer is trying to print. When your printer has gotten all the data it needs to function, that’s when it will stop flashing. So, the obvious way to fix this is to give the printer all the necessary information it needs.

2. If the resume light is flashing

If the issue lies with your Resume light, then you need to make sure that the following needs are being met:

  • You have enough paper in the printer.
  • You check for a printer jam, especially in the paper tray.
  • Your printer has paper and has not run out.
  • You have clicked on the Resume button at least once.

If the Print Cartridge Status Light is on But not Flashing Regularly

The next step is to see if the print cartridge status light is on and flashing or not. If it is flashing, then it means that the device is low on ink. In case it is low on ink, then you will have to change the cartridge entirely. If this isn’t the case, and your light doesn’t switch off, then you might want to switch your device off. Once it is off, then turn it back on.

If the Print Cartridge Status Light is the One That’s Flashing

If the print cartridge status light is flashing then you need to access the print cover, take out the print cartridge and close it back up.

In case your light is flashing, access the printer cover, add in a new print cartridge, and then take out the cartridge you placed in earlier. After this, your light will stop flashing and you have solved the issue.

In case your issue isn’t fixed, we recommend that you try to clean the cartridge by hand. If your printer is being utilized in an unclean area, then apart from ink drying on it, there can also be a residue of dirt.

In other cases, if the printer cartridge light is flashing, then it might also have to do with the ink nozzles. If you’ve handled the nozzles by hand under any circumstance, this can be the reason behind the flashing.

If you want to clean them, first rotate the cartridge with the copper side up. Then, you can clean them with a damp cloth so that all dirt is gone. Make sure your cartridge is no left in the open air for more than half an hour.

If the Print Cartridge Status Light is Flashing When You Add a New One

This can very well mean that your printer has rejected your newly inserted print cartridge. Since you are using an HP printer, you need to make sure that you use genuine HP ink cartridges as it doesn’t accept other brands. When the print cartridge light flashes after adding a new one, it points to cartridge rejection.

If you try to print with this cartridge inside the printer, then you will get an error that states, you need to remove or replace the cartridge as it has been rejected! Here are the steps you need to follow to address this issue:

  • First, you need to figure out what color, kind, and make of cartridge you are using and which ones are allowed. These should be added to the right parts of the cartridge area.
  • After this, you need to add the print cartridge to your device.
  • Take out the newly installed cartridge and if your device is no longer flashing, it means the issue was with the cartridge.
  • Your next step will be to replace the older one.
  • If this hasn’t fixed the issue either, then you need to get a new cartridge and add it again.
  • If both Resume and Power options are flashing together

In case you see that the power button and the option for Resume are both flashing simultaneously, then this means that you are dealing with a blockage in the carriage. For this, we do not recommend any action to be taken other than to contact HP’s help or support helplines for more guidance.


It can be extremely frustrating to have problems with your HP printer so especially since there are so many different options that might be the reason behind this. Luckily, this in-depth guide on how do I fix the flashing light on my HP printer has all the specifics and details you need to address and solve your issue.

About David Shelton

Besides many test devices, David now has his eighth own 3D printer running and loves to print as a hobby for family, friends, and himself. He has over a decade of experience in 3D printing. He is happy to share his experience with each new article to help all of you regarding your printing queries! In his spare time, he loves to travel and watch obscure cinema. Happy printing!!

Leave a Comment